INSTALLATION

Use the Autoswitch and have a hidden switch working for you. The Autoswitch is easy to install. If you already have auxiliary driving lights installed with a controlling toggle switch and relay, Put the Autoswitch VIOLET and the BLACK wire where your toggle was connected on the relay coil pins. Tap the RED into any ignition-swtiched 'ON' wire for power, YELLOW wire to high beam line for a trigger pulse. Add connections to ground, and neatly tuck the Autoswitch and wires out of the way in any convenient location. And without building a bracket, drilling any holes, or modifying your dash, you’re done!

Click here to download complete detailed AS-4NB directions as an Adobe pdf file.

Click here to download complete detailed AS-4P directions as an Adobe pdf file

Click here for a listing of authorized Autoswitch installers.

Click here for Prototype Installation Pictures.

WIRING

Installing the Autoswitch will not alter your existing wiring and can never cause a malfunction to your existing circuits. The Autoswitch simply taps any 12 volt wire after the ignition switch for power and the 12 volt wire going to the high beam headlamp for the trigging 1 second pulse. Add connections to ground and the coil of the auxiliary light relay and you have installed the Autoswitch!

For additional information, please view our Relay Basics for the Novice" page.