AutoSwitch (Standard) Specifications: Size: 1.5" X 1.5" X 0.5" Housing: Watertight, Epoxy encapsulated Mechanical: Vibration and shock proof Input/Outputs: 11-14 volts Control pulse: 0.8 to 1.8 seconds (specials possible) Auxiliary Relay: 12VDC, 90 to 100 Ohm coil - Not Included Indicators: Clear-OFF Green-On LED Protection: Reverse voltage, over current trip and auto-reset VIOLET WIRE NOT PROTECTED Wires: All control wires 20g aprox 12" long LED cable 24g 48" long. Model AS-4P Wiring Connections 1 Switched-ON 12V source. 2 12 volt pulse tap to high beam wire. 3 Ground wire connection 4 12 volt output to one side of auxiliary relay coil. 5 Ground wire connection to other side of relay coil (unless coil is already grounded). © Copyright 2002 Autoswitch No portion of this site or its contents may be reproduced without explicit permission from Autoswitch. Web site designed and maintained by EUR-AM